联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
济南�？鼐砹泵欧浩鹆斯收系奈抟煊心男�？
如今我们的许多地方使用的是济南�？鼐砹泵�，关于这个卷帘门的作用以及利益，各人差未几都了解过，那么卷帘门�？胤浩鹆斯收系奈抟煊心男�？
Nowadays, we use Jinan remote control rolling shutter door in many places. We almost all know about the function and benefits of this rolling shutter door. What are the maintenance methods for the remote control failure of rolling shutter door?
1、电动机不动或转速慢此故障原因一般是线路断路、电机烧损、停止按钮没复位、限位开关行动、负载较大等引起。
1. The motor does not move or the speed is slow. The fault is generally caused by circuit break, motor burning, stop button not reset, limit switch action, heavy load, etc.
处理要领：检查线路、并接通;更换烧损电机;更换按钮或重复按动频频; 拨动限位开关滑块使它脱离微动开关触点， 并调解微动开关位置;检查机械部分 有无卡阻，若有则清理卡阻清理障碍物。
Treatment methods: check the circuit and connect it; replace the burnt motor; replace the button or press it repeatedly; move the slide of the limit switch to make it separate from the contact of the microswitch and adjust the position of the microswitch; check whether the mechanical part is jammed, and clean up the obstruction if any.
2、控制失效故障爆发的部位及原因：.继电器(接触器)触点粘死、行程微动开关失效 或触片变形、滑块紧定螺钉松、靠板螺丝松使靠板移位，使滑块或螺母不可随丝 杆转动而移动、限位器传动齿轮破损、按钮上、下键卡死。
2. The parts and causes of control failure failure are as follows: the contact of relay (contactor) is stuck, the travel microswitch is invalid or the contact piece is deformed, the locking screw of slide block is loose, the screw of backup plate is loose, so that the slider or nut can not move with the screw rod rotation, the transmission gear wheel of limiter is damaged, and the up and down keys of button are stuck.
处理要领：更换继电器(接触器);更换微动开关或触片;紧定滑块螺钉并 使靠板复位;更换限位器传动齿轮;更换按钮。
Treatment methods: replace the relay (contactor); replace the microswitch or contact piece; tighten the slider screw and reset the backup plate; replace the transmission gear of the limiter; replace the button.
3、手拉链不动 故障原因：环形链条堵住十字槽;棘爪无脱离棘轮;压链架卡死。
3. The cause of the failure of the hand zipper is: the ring chain blocks the cross groove; the pawl is not detached from the ratchet wheel; the chain holder is stuck.
处理要领：理顺环形链条;调解棘爪与压链架相对位置;更换或润滑销轴。
Treatment method: straighten out the ring chain; adjust the relative position between the pawl and the chain holder; replace or lubricate the pin shaft.
济南�？鼐砹泵�
Jinan remote control rolling shutter door
4、电机振动或噪声较大 故障原因：刹车盘不平衡或断裂;刹车盘无紧固;轴承失油或失效;齿轮啮合不顺、失油或磨损严重;电机电流声或振动。
4. The causes of motor vibration or noise are as follows: the brake disc is unbalanced or broken; the brake disc is not fastened; the bearing is lost oil or failure; the gear meshing is not smooth, oil loss or serious wear; the motor current sound or vibration.
处理要领：更换刹车盘或重新调解平衡;紧固刹车盘螺母;更换轴承;修配电机轴输出端齿轮、润滑或更换;检查电机，如电机坏损则更换。
Treatment methods: replace the brake disc or readjust the balance; tighten the brake disc nut; replace the bearing; repair the motor shaft output gear, lubrication or replacement; check the motor, if the motor is damaged, replace it.
以上就是Z6尊龙官方网站官网入口门业为各人介绍的关于济南�？鼐砹泵�的全部内容，希望可以资助到各人，如果有需要可以联系Z6尊龙官方网站官网入口或者关注我们公司网站：我们期待您的惠临。
The above is all about Jinan remote control rolling shutter door introduced by Fuqiang door industry. I hope it can help you. If you need, you can contact us or pay attention to our company website: We look forward to your coming.
下一篇：济南卷帘门如何使用才华抵达效果？ 上一篇：电动卷帘门如何延长使用年限？
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领，你学会了吗？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料。济南卷帘门接纳高强度铝合金质料，具备抗风、抗撞击和防盗特性，并配备...
