防火卷帘门的有源和无源怎么进行区分？_公司新闻_新闻资讯-Z6尊龙官方网站官网入口

公司新闻

首页>>新闻资讯>>公司新闻防火卷帘门的有源和无源怎么进行区分？

公司新闻

新闻资讯

联系Z6尊龙官方网站官网入口

Z6尊龙官方网站官网入口

联系人：林经理

电话：151 6888 2846

邮箱：527800164@qq.com

地点：济南市历下区化纤厂路8号3号楼101号

防火卷帘门的有源和无源怎么进行区分？

来源：日期：2022-04-16 宣布人：

　　防火卷帘门如今应用的地方是越来越多了，所以我们应该多多去了解一些事项，以便以后能有所使用。在此说一个问题，防火卷帘门的有源和无源怎么进行区分？了解好这个问题，才华发挥出更好的卷帘门作用。

　　Fire shutter doors are now used in more and more places, so we should learn more about some matters, so that we can use them in the future. Here is a problem, how to distinguish the active and passive fire shutter doors? To understand this problem, we can play a better role of rolling shutter door.

　　消防�？榇笾驴梢苑治淙肽？�，输出�？�，输入输出�？�，隔离�？�，中继�？�，切换�？�，多线控制�？榈鹊壤嘈��？亓渴淙肽？榫褪墙邮找桓鑫拊创サ阈藕�，通过该信号的输入接入到系统中，一般的输入�？榭梢杂糜诮邮账髦甘酒鳌⒀沽亍⑿藕欧У鹊壬璞傅谋ň⒎聪煨藕�。

　　Fire control module can be roughly divided into input module, output module, input and output module, isolation module, relay module, switching module, multi-line control module and so on. Switching input module is to receive a passive contact signal, through the input of the signal into the system, the general input module can be used to receive water flow indicator, pressure switch, signal valve and other equipment alarm, feedback signal.
Z6·尊龙凯时「中国」官方网站

　　综上所述无源所指的是�？�。�？橐卜钟性春臀拊�。通常防火卷帘门控制箱也是无源的。�？傅氖欠阑鹁砹泵琶挥惺盏较揽刂频男藕攀�，是处在�？淖刺�。防火卷帘门中无源�？褪遣淮缭吹某？サ�，也叫干触点。在防火卷帘门控制中常用在隔离和差别控制回路中通报和控制信号的接点。�？サ憔褪窃谙呷νǖ缡贝τ诒蘸献刺�，在线圈断电时处于断开状态。

　　In summary, passivity refers to modules. Modules are also active and passive. Usually the fire shutter door control box is also passive. Normally open refers to that the fire shutter door is in normally open state when it does not receive the signal from the fire control center. Passive normally open fire shutter door is normally open contact without power supply, also called dry contact. In the fire shutter door control commonly used in isolation and different control loop transmission and control signal contact. Normally open contacts are closed when the coil is energized and disconnected when the coil is powered off.

　　济南卷帘门提示：有源就是有电，有发电方法，不但供电，感应电，隔离都欠好。电磁感应可以爆发电、电弧等。因此，如果没有连接回路，只要触点在上述情况中容易爆发感应电或回路电，就是有源触点。无源触点是在差别的控制回路中隔离传输和控制信号的触点。在差别的场合，防护品级和要求是差别的。虽然，越高越好，这和使用情况有关。

　　Ji 'nan rolling shutter door tip: active is electricity, power generation, not only power supply, induction electricity, isolation is not good. Electromagnetic induction can produce electricity, electric arcs, etc. Therefore, if there is no connection loop, as long as the contact is prone to inductive or loop electricity in the above environment, it is active contact. Passive contacts are contacts that isolate transmission and control signals in different control loops. In different occasions, the level of protection and requirements are different. Of course, the higher the better, it depends on the environment.

　　防火卷帘门的有源和无源怎么进行区分？看完以上相信各人有所了解了。虽然有源无源的使用是需要基于实际情况来作为的，不要随便乱使用，不然就会爆发欠好的影响。更多的内容就来网站www.jnzxmy.com咨询吧！

　　How to distinguish the active and passive fire shutter doors? After reading the above, I believe you have some understanding. Of course, the use of active and passive needs to be based on the actual situation, do not randomly use, or it will have bad effects. For more information, please visit www.jnzxmy.com!

下一篇：卷帘门运转期间泛起遇阻现象怎么回事？上一篇：济南卷帘门的下降控制如何？