联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
建议装置卷帘门前进行相关丈量
在装置济南卷帘门之前，厂家一般需要先量好门，因为差别园地的尺寸是纷歧样的。如果不丈量尺寸，生产出来的门往往无法装置。那么，在丈量之前，应该注意哪些问题呢 ？
Before installing Jinan roller shutter door, the manufacturer generally needs to measure the door first, because the size of different sites is different. If the size is not measured, the doors produced often cannot be installed. So, what should we pay attention to before measuring?
1.两面成直角的墙。丈量师应主动征求客户意见。结果如下：客户选择坚持左右线条一致且美观。丈量师可将目标尺寸缩小120mm，以抵达上述目的；二是客户选择的目标尺寸稳定，装置人员在墙体两边剪直角线，直到合适为止。
1. a wall with two sides at right angles. Surveyors should take the initiative to solicit customers' opinions. The result is as follows: the customer chooses to keep the left and right lines consistent and beautiful. The surveyor can reduce the target size by 120mm to achieve the above purpose; Second, the target size selected by the customer remains unchanged. The installer cuts right angle lines on both sides of the wall until it is appropriate.
2.与墙壁成直角。济南卷帘门厂家在丈量时要主动询问客户对门的意见� ？突а≡窦岢窒咛跬骋幻拦�。丈量时，可将目标尺寸缩�。ㄋ醵蹋�60mm，即抵达上述目标。其次，客户选择的目标尺寸稳定，装置人员可以适时剪线。
2. at right angles to the wall. Jinan roller shutter door manufacturers should take the initiative to ask customers' opinions on the door when measuring. The customer chose to keep the lines uniform and beautiful. When measuring, the target size can be reduced (shortened) by 60mm, that is, to achieve the above goals. Secondly, the target size selected by the customer remains unchanged, and the installer can cut the thread in time.
3.在地板上。由于客户的实际情况相差较大，一般分为三种：一是地板已经铺好，可以用丈量法丈量；二是如果不铺设地板，应降低高度：
3. on the floor. As the actual situation of customers is quite different, it is generally divided into three types: first, the floor has been paved and can be measured by measuring method; Second, if the floor is not laid, the height shall be reduced:
（1）地砖：大理石、瓷砖减薄50mm；
(1) Floor tile: marble and ceramic tile shall be thinned by 50mm;
（2）瓷砖木地板、强化木地板、实木地板减少30mm；
(2) Ceramic tile wood floor, laminate wood floor and solid wood floor shall be reduced by 30mm;
（3）骨架木地板与实际骨架地板的厚度增加10mm。
(3) The thickness of skeleton wood floor and actual skeleton floor shall be increased by 10mm.
（4）左右墙、顶墙的笔直度和倾斜度。丈量师应仔细选择合适的点作为目标尺寸。
(4) Verticality and inclination of left and right walls and top walls. The surveyor should carefully select the appropriate point as the target size.
（5）装置人员应主动征求客户意见。只有当视察人员和客户体现目标尺寸减少了60毫米时，才实现了保存生产线的愿望。二是客户选择的目标尺寸相同（客户要求门扇大一些），一定要跟客户说明，小切口要凭据直角墙框的边沿来搭配（效果是线左右差池称）。
(5) The installer should actively seek the customer's opinions. The desire to retain the production line was realized only when the investigator and the customer stated that the target size had been reduced by 60mm. Second, the target size selected by the customer is the same (the customer requires the door leaf to be larger), so it must be explained to the customer that the small cut should be matched according to the edge of the right angle wall frame (the effect is that the line is asymmetric from left to right).
在卷帘门正式装置之前，济南卷帘门厂家要提前派卖力人进行丈量，以便生产出尺寸规格更合适的门，便当用户使用。另外，装置完成后，检查门是否可以正� ？艉凸乇�，以免影响日常使用。更多相关内容就来关注我们网站www.jnzxmy.com吧！
Before the formal installation of roller shutter door, the manufacturer of Jinan roller shutter door shall send a person in charge to measure in advance, so as to produce doors with more appropriate dimensions and specifications for the convenience of users. In addition, after installation, check whether the door can be opened and closed normally to avoid affecting daily use. For more information, please visit our website www.jnzxmy Com!
下一篇：防火卷帘门内部一般用无机类产品填充 上一篇：卷帘门问题小知识整理总结
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁 ？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领，你学会了吗 ？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料。济南卷帘门接纳高强度铝合金质料，具备抗风、抗撞击和防盗特性，并配备...
