联系Z6尊龙官方网站官网入口
Z6尊龙官方网站官网入口
联系人：林经理
电话：151 6888 2846
邮箱：527800164@qq.com
地点：济南市历下区化纤厂路8号3号楼101号
电动卷帘门的12个小故障排除技巧
1、电动卷帘门到顶忽上忽下不绝
1. The electric roller shutter door keeps moving up and down when it reaches the top
机械有卡死或者润滑不良，检查一下机械负载�；悼赡苡泄舱裣窒�，调解载波，改变减速比，避开共振频率，加装减震垫片。
If the machine is stuck or poorly lubricated, check the mechanical load. Mechanical resonance may occur. Adjust the carrier wave, change the reduction ratio, avoid resonance frequency, and install shock absorbers.
2、电动卷帘门总是卡顿
2. The electric roller shutter door always gets stuck
常见的是轴承问题。如果不可确定是否是轴承问题，建议先把负载和电机脱开。以确定是电机问题照旧负载问题�？绾兔簧系缜岸家檬肿碌缁�，检查是否有卡阻感。电机有卡阻感，电机连接线没碰到一起那就是控制器坏了。如果电机有转动声，但不见门体运行，那有可能是需要更换电容。如排除了电机问题，那有可能是门体运行轨道有杂质，这些杂质的保存会导致门体的运行受阻。
A common issue is with bearings. If it is uncertain whether it is a bearing issue, it is recommended to disconnect the load from the motor first. To determine whether it is a motor issue or a load issue. Before turning on or off the power, manually rotate the motor to check for any jamming. The motor has a jamming feeling, and if the motor connecting wires do not touch each other, it means that the controller is broken. If the motor makes a rotating sound but the door body is not running, it is possible that the capacitor needs to be replaced. If the motor problem is ruled out, it is possible that there are impurities in the running track of the door body, which can cause the operation of the door body to be hindered.
3、电动快速卷帘门下到位了，却还自动下滑
3. The electric fast rolling shutter door is in place, but it still automatically slides down
可能是抱闸或是卡住机械的工具坏了，另有可能是抱闸不紧导致的，不可抱住卷闸门，电动卷闸门应有个机械抱死的部件，就是能卡住卷闸门卷轴的那个。检查一下，如果确实是坏了，就需要更换一个，如果只是偶然一次没卡死，可以重新上下调试一下。
It may be due to the brake or something stuck in the machinery that is broken, or it may be due to the brake not being tight enough to hold the rolling gate. The electric rolling gate should have a mechanical locking component that can hold the rolling gate shaft. Check it out, if it is indeed broken, it needs to be replaced. If it doesn't get stuck by chance, you can debug it up and down again.
4、电动卷帘门�？卮虿豢�
4. The remote control of the electric roller shutter door cannot be opened
，装置调试的时候有没有问题，如果装置调试没问题的话，一般电机和卷轴也不会有问题。那么通�；峥悸俏尴咭？氐奈侍�。�？仄饔忻挥猩柚煤谩⑹欠裼械纭⒂忻挥兴鸹�。 如果是一樘很老的、使用时间很久的卷帘门，又排除了�？仄鞯奈侍�，那么就用开关操作一下，听一下电机是否还在事情。电机没有声音，卷轴也不事情，那么就需要考虑更换电机了。
Firstly, there are no issues during installation and debugging. If there are no issues during installation and debugging, generally there will be no problems with the motor and winding shaft. So the issue of wireless remote control is usually considered. Is the remote control set properly, powered, and damaged. If it is a very old and long used roller shutter door, and the problem with the remote control is eliminated, then use the switch to operate it and listen if the motor is still working. The motor has no sound and the winding shaft is not working, so it is necessary to consider replacing the motor.
5、电动卷帘门行程调法
5. Electric roller shutter door stroke adjustment method
先凭据装置说明书上的知识，输入初始密码，进入“设置”，再进入“行程设置”，然后再凭据自己的需求进行调解。
Based on the knowledge in the installation manual, enter the initial password, enter "Settings", then enter "Travel Settings", and then adjust according to your own needs.
6、卷帘门电动门内部线路如何检查
6. How to check the internal wiring of the electric roller shutter door
翻开帘布右侧的“控制箱”进行检查。
Open the "control box" on the right side of the curtain for inspection.
控制箱内部展示图
Internal display diagram of control box
7、电动卷帘门子夜自动开
7. Electric roller shutter door opens automatically at midnight
可能该电动移门装置了雷达感应器。夜间雷达碰到感应物，就自动翻开了。建议夜间不使用卷帘门的情况下，更好是锁死，并切断电源。
Perhaps the electric sliding door is equipped with a radar sensor. At night, the radar automatically turns on when it encounters sensing objects. It is recommended to lock and cut off the power supply when not using the rolling shutter door at night.
8、电动卷帘门能不可改成手动的
8. Can the electric roller shutter door be changed to manual
可以，进入行程，进行模式设置，改为手动。
Yes, enter the travel mode and set the mode to manual.
9、电动卷帘门按一下动一下
9. Press and move the electric roller shutter door
通常是因为模式设置为“点动”模式了，可以重新进入行程设置，对模式进行修改。修改为“手动”或者“自动”
Usually, because the mode is set to "jog" mode, you can re-enter the travel setting and modify the mode. Change to "manual" or "automatic"
10、电动卷帘门向上欠好使
10. The electric roller shutter door is difficult to operate upwards
排除电机问题，通�？悸强刂萍盗�，需要翻开控键盒面板，进行检修。
To troubleshoot motor issues, it is usually considered that the control keys are broken and the control box panel needs to be opened for maintenance.
11、电动卷闸门一边高一边低
11. Electric roller shutter with one side high and one side low
排除按装时没装好的可能，或者有硬物阻塞。需要检查一下卷帘行进的通道。
Eliminate the possibility of not being properly installed during installation, or having hard objects blocking it. We need to check the passage of the roller shutter.
12、快速卷帘门检修那些项目
12. What are the maintenance items for fast rolling shutter doors
PVC快速卷帘门主要是要防撞柱断裂，帘布卡死下不来，内外压差太大运行不畅，滚筒脱焊，控制器不灵等。
The main purpose of PVC fast rolling shutter doors is to prevent collision column breakage, stuck curtain fabric, large internal and external pressure difference, poor operation, roller detachment, and ineffective controller.
谢谢您的阅读，此文的文章来源：济南卷帘门更多的内容和问题请点击：我们会继续努力的为您提供效劳，谢谢您的支持！
Thank you for reading. The source of this article is Jinan Rolling Shutter Door. For more information and questions, please click on: We will continue to work hard to provide you with services. Thank you for your support!
下一篇：防火卷帘调试要注意什么？ 上一篇：快速卷帘门怎么优良选择？
阅读/ Recommended reading
- 济南卷帘门10 2024-12-03
- 车库卷帘门故障及维修要领 2024-12-14
- 车库卷帘门的维修和保养要领有哪些 2024-12-07
- 济南卷帘门：门锁上了该怎么解锁？ 2024-11-23
- 济南卷帘门：断掉一片后的处理要领，你学会了吗？ 2024-11-19
- 如何延长卷闸门的寿命 2024-11-06
- 重视卷帘门门口堆物问题 2024-11-06
- 快速卷帘门介绍与快速卷帘门质料说明 2024-10-26
济南卷帘门的事情原理及装置维修
2024-12-18
济南卷帘门在家庭、商业和工业建筑中获得了广泛应用，其功效齐全、可靠、美观实用的特点使其成为门窗装饰的质料。济南卷帘门接纳高强度铝合金质料，具备抗风、抗撞击和防盗特性，并配备...
